16
SAMSUNG ELECTRONICS
Press the Mode Selection key to set the displaypart andcheck thedisplaypart.
→
Thedisplaypart shows likebelowwheneachtime youpressModebutton.
Step 6
Upon completion of the selection, check you made right selections.
When pressing the operation ON/OFF key with the direction of remote control for the sound’’Ding’’or
’’Diriring’’isheard and the OPERATION ICON( ) lampof the display is ickering at the same time,
then the input of option is completed. (If the deriving sound isn't heard, try again pressing the ON/
OFF button.)
Step 7
PressingtheON/OFFbutton(
) .
First : Remove the battery from the remote control.
Second : Re-insert the battery into the remote control.
Third : Press ON/OFF key with the direction of remote control for set.
■
Error mode
1. If all lamps of indoor unit are ickering, Plug out, plug in power plug again and press ON/OFF
key to retry.
2. If the unit is not working properly or all lamps are continuously ickering setting the option
code, see if the correct option code is set up for this model
Step 8
Unit operation test-run.
■
Option Items
Model name set
Option code
Gerneral Install
AR09TXFCAWK/EU 011A05-17C0EA-271920-371804 020000-100000-200101-300335
AR12TXFCAWK/EU 011A05-17C0FA-272323-371804 020000-100000-200101-300335
AR24TXEAAWK/EU 011A05-16C25B-27414A-371404 020000-100000-200101-300357
To Next Page
Loading...
