Samsung Electronics 4-7
No Parts
Procedure Remark
2
CONTORL IN
5) Loosen Stepping MOTOR Wire / BLADE Wire.
6) Loosen MOTOR Wire.
Caution:
When you separate the connector,
pull pressing the locking button.
7) Loosen the terminal block wires.
Caution:
When you separate the connector,
pull pressing the locking button.
8) Loosen the Thermistor wire connector,
Displa
y wire connector.
Caution:
When you separate the connector,
pull pressing the locking button.
To Next Page
Loading...