10
No. Part Procedure Remark
Common Work
1
1) Loosen the fixing screws and separate
the cover control.
2) Separate the connection wire from the
terminal block.
3) Loosen the fixing screws and separate
the upper cabinet.
4) Loosen the fixing screws and separate
the front cabinet.
5) Loosen three screws and pull up the
control box.
6) Separate the terminal cover and
separate the comp lead wire.
■ US24A1(2)RC/US24A1(2)RCD
Disassemble and reassemble (Continued)
ΙΙ
❊ The designs and shape are subject to change according to the model.
AS18A9(0)RCF SM_E_15775 3/10/05 7:15 PM Page 10
To Next Page
Loading...
