Samsung BD-D5900 - System

40 English
Setup
Dynamic Range Control
You can listen at low volumes but still hear dialog
clearly.
This is only active when a Dolby Digital signal is
detected.
• Auto : The Dynamic Range Control will be set
automatically based on the information provided
by the Dolby TrueHD Soundtrack.
• Off : Turn Dynamic Range Control off.
• On : Choose to listen to a movie at a lower
volume without losing clarity of dialog.
Downmixing Mode
Set whether to downmix the multi-channel audio
into fewer channels.
• Normal Stereo : Downmixes the multi-channel
audio into two channel stereo. Choose when
connected to equipment that does not support
virtual surround functions such as Dolby Pro
Logic.
• Surround Compatible : Downmixes multi-
channel audio into surround compatible stereo.
Choose when connected to equipment that
supports virtual surround functions such as
Dolby Pro Logic.
DTS Neo:6
You can enjoy multi-channel sound from a simple
2-channel audio source.
• Off : Outputs a 2-channel audio signal through
the front speakers only.
• Cinema : Select this if you want to play
2-channel movie sound over multi-channels.
• Music : Select this if you want to play 2-channel
music sound over multi-channels.
✎
NOTE
`
If you are using HDMI receiver, this option is
available when you set Digital Output setup as PCM.
Audio Description
You can add a verbal description to the main
audio to help the visually impaired.
• On : Turns the Audio Description function on.
• Off : Turns the Audio Description function off.
✎
NOTE
`
If you select on, you can adjust volume.
System
Plug & Play
By using Plug & Play, you can set country, clock
mode, TV aspect and Network Settings, etc.
For more information on the settings, refer to the
corresponding section in this user manual.
(See page 31~48)
✎
NOTE
`
If you want to change plug & play options, you
should enter the password.
Smart Hub Screen Size
Set the Smart Hub Screen to the optimal size.
• Size 1 : Display smaller application icons, you
may see some black on all sides of screen.
• Size 2 : Display normal application icons.
• Size 3 : Display larger application icons, image
may be too large for your TV screen.
Anynet+(HDMI-CEC)
Anynet+ is a convenient function that offers linked
operations with other Samsung products with the
Anynet+ feature.
To operate this function, connect this product to a
Samsung TV with an HDMI cable.
You can operate this product using a Samsung
TV remote control and start disc playback simply
by pressing the PLAY (
) button on the TV’s
remote control.
For more information, please see the TV user
manual.
• On : Anynet+ functions will work.
• Off : Anynet+ functions will not work.
02064Q-BD-D5900-HC-ENG-.indb 40 2012-01-12 오전 11:15:37