Audio
Digital Output
Set Digital output option suitable for your TV or AV
Receiver. For more details, please refer to the digital
output selection table. (See pages 73~74)
PCM Downsampling Set whether to use downsampling processing or not.
Dynamic Range Control
Set Dynamic Range control option for Dolby Digital,
Dolby Digital Plus and Dolby TrueHD.
Auto : The Dynamic Range will be controlled
automatically based on the information provided by
the Dolby TrueHD Soundtrack. This setting is same
with "On" for Dolby Digital and Dolby Digital Plus.
Off : You can enjoy original sound without
compressing Dynamic Range of the sound.
On : The Dynamic Range is compressed appropriately
by boosting low level sound and reducing extremely
loud sound.
Downmixing Mode Select Downmix method for stereo output.
DTS Neo:6 Mode
You can enjoy multichannel sound via HDMI output even
for 2 channels audio source.
Audio Sync
In some cases when the product is connected to a
digital TV, the audio signal may not synchronize with the
video signal. If this occurs, adjust the audio delay time
to match the video signal.
•
You can set the audio delay time between 0 msec
and 200 msec.
Adjust it to the optimal setting.
| NOTE |
\
The audio delay time you specify may not be exact depending
on the played content.
|
24 English
02230H-BD-E8900A-XY-ENG.indd 24 2012-03-26 오후 3:41:31
To Next Page
Loading...
