Samsung CL29A551GQ9XZD - Disassembling the CRT Ass’y

Disassembly & Reassembly
Samsung Electronics 3-3
Part Name Description Description Photo
Chassis
Holder
① Separate the cable connecting the FBT
and CRT from the CRT.
 Since a high voltage current resides
inside the CRT, do not to touch the
CRT hole with metal or your body when
separating the cable.
3-1-3 Disassembling the CRT Ass’y
Part Name Description Description Photo
CRT
Ass’y
① Separate the cables connecting the
Main Ass’y and the CRT Ass’y.
Pull the wires while
pressing on the fixing clip.
① Separate the wires from the FBT of the
Main Board and the CRT Ass’y.
② To separate thick wire, pull the wires
while pressing the push-type clip at the
connector.
 Take care when separating the wires
because pulling the wires by force may
damage the socket. In addition, separate
the wires on a flat and clean surface so
as to prevent scratching of the material
and the PCB.
Pull the wires while
pressing on the fixing clip.