A
DVANCED
P
RINTING
5.17
5
Using Status Monitor
If an error occurs while printing, the Status Monitor window
appears, showing the error.
N
OTES
:
• The Status Monitor program can only be used if you connect the
printer to your computer with the USB cable, or on a network.
• You can use Status Monitor in Windows 98/Me/NT 4.0/2000/
2003/XP.
Installing Status Monitor
To install Status Monitor, select
Custom
and then
Status
Monitor
while installing the software. For details, refer to the
Setup Guide supplied with your printer.
If you selected
Typical
while installing the software, you can
install Status Monitor as follows:
1
From the
Start
menu, select
Programs
➔
Samsung CLP-
510 Series
.
Or place the CD-ROM into the CD-ROM drive.
2
Select
Maintenance
.
3
Select
Repair
.
N
OTE
: If your printer is not already connected to the computer,
the following window will appear.
• After connecting the machine, click
Next
.
• If you want to skip the connection status, click
Next
and
No
to
the following screen.
To Next Page
Loading...
