Samsung CLP-510 Series - Installing Software for Macintosh

A.2
Installing Software for Macintosh
The CD-ROM that came with your printer provides you with the
PPD file to use the CUPS driver, Apple LaserWriter driver, for
printing on a Macintosh computer.
Refer to the table below for the driver available for your printer,
and for system requirements.
Verify the following before you install the printer software:
1 Make sure that you connect the printer to the computer.
Turn on your computer and printer.
2 Insert the CD-ROM which came with your printer into the
CD-ROM drive.
3 Double-click the SAMSUNG_CLP on your Macintosh
desktop.
4 Double-click the Installer folder.
5 Double-click the Samsung SPLC Installer icon.
6 Enter the password and click OK .
7 Click Continue and then click Continue .
Your
Printer
Available
Driver
Connection
System
Requirements
CLP-510
CLP-510N
CUPS driver USB interface Mac OS 10.3.x
Network
interface
Item Requirements
Operating system Mac OS 10.3.x
RAM 128 MB
Free disk space 200 MB
U SING Y OUR P RINTER WITH A M ACINTOSH
A.5