D.2
Installing Additional Printer Memory
Your printer has a dual in-line memory module (DIMM) slot. Use
this DIMM slot to install more memory for the printer.
N
OTE
: Your printer has 64 MB of memory which can be expanded
to 192 MB. Use only Samsung-approved DIMM, part numbers ML-
00MC (64MB), or ML-00MD (128MB). Contact your Samsung
dealer.
C
AUTION
: Static electricity can damage DIMMs. When handling a
DIMM, either wear an antistatic wrist strap, or frequently touch the
surface of the DIMM antistatic package and then touch bare metal
on the printer.
1
Turn the printer off and unplug all cables from the printer.
2
To remove the control board cover, press down on the tabs
at the top and take it off.
3
Remove the two screws holding the metal plate in place,
and then remove the metal cover, as shown below.
I
NSTALLING
P
RINTER
O
PTIONS
To Next Page
Loading...
