S
ETUP
G
UIDE
16
6
Squeeze the paper guide, as shown, and side it to the stack
of paper until it lightly touches the side of the stack. Do not
press the guide too tightly against the edge of the paper as
it will cause the paper to bend.
N
OTE
:
If you want to change the size of the paper in the tray,
refer to your printer’s User’s Guide on the CD-ROM.
7
Slide the tray back into the printer.
N
OTES
:
• Do not push the width guide far enough to cause the material to
warp.
• If you do not correctly adjust the width guide, it may cause a
paper jam.
To Next Page
Loading...
