C.14
•
Encryption
: “None”, “64-bit WEB”, or “128-bits WEB”.
Default setting is “None”. If your network uses WEP
encryption keys, you must configure the encryption keys. You
can configure up to four keys. The active key must match the
value and active key position (for example, Key 1) configured
on other wireless devices.
•
Using Key
: Select the key to use in your network.
•
Key Type
: Select the key type of your network.
•
Key 1
,
Key 2
,
Key 3
,
Key 4
: Enter the key number for
“Encryption”. The numbers you can enter are as follows:
Hexadecimal Alphanumeric
64-bit WEP 10 digits 5 characters
128-bit WEP 26digits 13 characters
U
SING
Y
OUR
P
RINTER
ON
A
N
ETWORK
To Next Page
Loading...
