D.11
D
8
Replace the control board cover.
9
Plug one end of the Ethernet cable into the Ethernet
network port on the printer and
the other end of the cable
into a network LAN connection.
10
Reconnect the power cord and turn the printer on.
N
OTE
: For information about configuring and using the printer in a
network environment, refer to the User’s Guide provided with the
network interface card. You can also configure the network
parameters using the control panel; see page C.6.
To the network
LAN connection
I
NSTALLING
P
RINTER
O
PTIONS
To Next Page
Loading...
