U
SING
P
RINT
M
ATERIALS
3.6
5
Do not exceed the maximum stack height. Overfilling the
tray may cause a paper jam.
6
Squeeze the paper guide, as shown and slide it to the stack
of paper until it lightly touches the side of the stack. Do not
press the guide too tightly against the edge of the paper as
it may cause the paper to bend.
N
OTE
:
If you want to change the size of the paper in the tray,
refer to page 3.7.
7
Slide the tray back into the printer.
8
When you print a document, select the paper type, size,
and source in your software application. For details, see
page 4.7.
To Next Page
Loading...
