Samsung CLP-680 Series - Fuser Unit

2.ProductSpecicationanddescription
2.2.4.4.FuserUnit
Thisunitconsistsofahalogenlamp,afuserbelt,aThermostat,andThermistor,etc.Itfusesthetonerthatwastransferredby
thetransferrollerontothepaper,byapplyingheatandpressuretocompletefusingprocess.
1)Thermostat
Whenaheatlampisoverheated,aThermostatcutsoffthemainpowertopreventover-heating.
•ThermostatType:Non-ContacttypeThermostat
•ControlTemperature:195°C±5°C
2)Thermistor
Itisatemperaturedetectingsensor.
•TemperatureResistance:7kΩ(180°C)
3)FusingBelt
Thefusingbeltgetsheatfromthehalogenlampandtransferittotonerandpaper.Thethinfusingbeltreduceswarming
uptimeandmodechangingtime.
4)Pressureroller
Thepressurerollerisarubberrollerwhichensurespropernipwidthbetweenthepressurerollerandfusingbelt.Itis
drivenbythedrivingsystemanddrivesthefusingbelt.
5)HalogenLamp
•V oltage:120V(115±5%)/220V:230±5%
•Capacity:850Watt±25W
2-17Copyright©1995-2013SAMSUNG.Allrightsreserved.