Samsung CLP-680 Series - Updating Firmware; Update Firmware via USB

4.AlignmentandTroubleshooting
4.1.7.UpdatingFirmware
Thischapterincludesinstructionsforupdatingtheprinterrmware.Youcanupdatetheprinterrmwarebyusingone
ofthefollowingmethods:
•UpdatethermwarebyusingtheUSBport.
•UpdatethermwarebyusingtheNetwork.
4.1.7.1.UpdatethermwarebyusingtheUSBport
Upgradingpreparations
•CLP680DW_UpgradeJig.exe
•CLP680DW_V4.00.01.51.exe
UpgradeProcedure
REMEMBER
Pleasefollowtheprocedurescarefully
1)MakesurethatthemachineisconnectedtothePCwithaUSBcableorNetwork
2)ExecuteCLP680DW_UpgradeJig.exeAndthenpatchromwillbedownloadonthemachineviaUSBorNetworkport.
3)PleasewaituntilgreenLEDisON.(About1~2minute)
4)ExecuteCLP680DW_V4.00.01.51.exe
5)Pleasewaituntilthemachineisreboot.
NOTE
IfthermwareversionisV4.xx.01.49andmorehigher,PleaserunaCLP680DW_V4.00.01.51.exeonly.(NeedNOTa
UpgradeJig.exe)
Copyright©1995-2013SAMSUNG.Allrightsreserved.4-17