Alignment & Troubleshooting
Service Manual
4-7
Samsung Electronics
3. Carefully take the jammed paper out of the
machine.
4. Close the inner cover.
5. Lowering down the scan unit gently and slowly
until it is completely closed. Make sure that it is
securely latched.
Be careful not to pinch your fingers!
In the paper exit area
1. Open and close the front cover. The jammed
paper is automatically ejected from the machine.
2. Gently pull the paper out of the output tray.
If you do not see the jammed paper or if there is
any resistance when you pull, stop and go to the
next step.
3. Open the rear cover.
4. If you see the jammed paper, pull it straight up.
Skip to step 8.
If you still do not see the paper, go to the next
step.
To Next Page
Loading...
