In tray 1
1. Open and close the front door. The jammed
paper is automatically ejected from the machine.
If the paper does not exit, go to the next step.
2.Pull out tray 1 .
3. Remove the jammed paper by pulling in the
direction shown. To avoid tearing the paper, pull
it out gently and slowly.
If the paper does not move when you pull, or if
you do not see the paper in this area, check the
fuser area and around the toner cartridge.
4. Insert tray 1 back into the machine until it snaps
into place. Printing automatically resumes.
To Next Page
Loading...
