4.1.3 Menu Overview
This chapter explains the menu item. If you want to know more information about the menu item, refer to the
User Guide.
■ ACCESSING OPERATOR PANEL MENU
1. Press Menu on the control panel.
2. Press Scroll (▲ to ▼) to highlight the desired setting and press OK.
3. If the setting item has sub menus, repeat step 2.
4. Press Scroll (▲ to ▼) to access the required value.
5. Press OK to save the selection.
6. If you want to move to the upper level menus, press Back .
7. Press Stop to return to ready mode.
To Next Page
Loading...
