Samsung CM1089A - Using the Check Button

16
ENGLISH
MULTI - STAGE COOKING.
1. Upon pressing the Program( ) button, the
oven will enter Program mode. The display will be
cleared.
2. Using the Number buttons, enter the program
number from 1 to 20.
3. Then, press the Power Level (
) button to select
power. By pressing the Power Level ( ) button
repeatedly, you can select the power level - HI,
MED, or LOW.
4. Use the Number buttons to enter the cooking
time. You can set a time from one second to 30
minutes. To set a time over one minute, enter the
seconds as well.
For example, to set 10 minutes, enter 1, 0, 0, 0.
5. Repeat step 3 and 4 for II or III stage memory memory proggramming.
6. Press the Program(
) button to complete
setting the memory.
The display will show ‘0’.
The maxium allowable cooking time is 30 min. If the time exceed 30
min, the display will show “E3”, then press Stop/Cancel (
) button
and repeat the steps.
USING MEMORY PROGRAMMING.
Press the Number buttons to select user-programmed memory
functions (please refer to memory programming) from 1 to 20.
Press the Start ( ) button.
IftheDEFROSTfunctionisincludedinSTAGECOOKING,itworksat
first.
If you want to change program, just reset MEMORY PROGRAMMING.
USING THE CHECK BUTTON
ConrmingthecookingtimeandPowerLevelineachmemoryprogram.
1. ClearalloperationsbypressingtheStop/Cancel
(
) button.
Press the Check ( )buttontoenterCheck
mode.
2. Using the Number buttons, enter the program
number from 1 to 20.
For example, suppose you press ‘5’, for the
Memory Program 5 which is HI Power Level, I
Stage cooking with a time of 6 minutes and 30
seconds, 6:30.
First, ‘5’ will be displayed. but will change to show the
3. After one second, the display will clear
automatically. If you want to check other Memory
Programs, just enter the Memory Program
numbers.
4. Press the Stop/Cancel (
) botton to exit the
Checkmode.
CM1089A_XEU_DE68-03310E_EN.indd 16 3/20/2013 3:17:23 PM