English - 15
Multi-stage cooking
1. Select the desired power level by pressing the POWER
LEVEL SELECTOR button or DEFROST SELECTOR
button.
Result : The selected power level will be displayed in the
display window.
2. Set the desired heating time by pressing the NUMBER
buttons.
Result : The selected time is displayed in the display
window.
Press the OK (Program 2sec) button for set the
present stage.
3. Repeat steps 1 and 2 for II or III stage memory
programming.
4. Press the START button.
Result : The oven lamp and cooling fan will be turned
on. The oven will automatically start heating
according to pre-programed cooking time and
power level. (I stage
g
II stage
g
III stage).
The time on digital display will count down.
The maximum time according to each cooking power level can be referred to in the
title “Power Levels ans Time Variations” on page 15. The NUMBER buttons will not
operate or respond when you press a cooking time exceeding the maximum value.
It is not possible to set a cooking time for longer than the maximum time allowed on
the chosen program. It is advisable to press CANCEL button and to enter a new
power level and cooking time.
You can not set up the same POWER LEVEL or DEFROST.
It operates as setting up sequence.
POWER LEVELS AND TIME VARIATIONS
The power level function enables you to adapt the amount of energy dissipated and thus
the time required to cook or reheat your food, according to its type and quantity. You can
choose between the power levels below.
Power level
CM1929/CM1929
*
Percentage Output
HIGH ( )
100 % 1850 W
MEDIUM (
)
70 % 1295 W
LOW (
)
50 % 925 W
HIGH DEFROST (
)
30 % 555 W
LOW DEFROST (
)
15 % 278 W
The cooking times given in recipes and in this booklet correspond to the specific power
level indicated.
Power level Max. Time
HIGH ( )
25 mins
MEDIUM (
)
40 mins
LOW (
)
40 mins
HIGH DEFROST (
)
50 mins
LOW DEFROST (
)
50 mins
CM1929B_XEU_DE68-04030D-02_EN.indd 15 2017-07-03 8:13:39
To Next Page
Loading...
