English - 17
MEMORY BUTTON PROGRAMMING
One-stage
1. Press the OK (Program 2sec) button for 2 sec.
Result : PROG indicator appears in the digital display.
2. Press appropriate NUMBER buttons for the desired
memory number. (1 ~ 30)
Result : Selected memory program code appears
below the MEMORY BUTTON NUMBER
INDICATOR.
3. Press the OK (Program 2sec) button for set the memory
number.
4. Select power level by pressing the POWER LEVEL
SELECTOR button or DEFROST SELECTOR button.
5. Press NUMBER buttons to set the cooking time.
6. Press the START button.
Result : The Oven beep.
7. When you want to program more, repeat the procedures
above again.
Be sure to press the buttons firmly.
Press the POWER LEVEL SELECTOR button or DEFROST SELECTOR button
one or more times until you get the desired power level.
The maximum time according to each cooking power level can be referred to in the
title “Power Levels and Time Variations” on page 15. The NUMBER buttons will not
operate or respond when you press a cooking time exceeding the maximum value.
It is not possible to set a cooking time for longer than the maximum time allowed on
the chosen program. It is advisable to press CANCEL button and to enter a new
power level and cooking time.
Be sure to press the buttons firmly in the right position.
Memory programs are available up to 30 items.
Make sure the unit is properly programmed.
After programming is finished, all you have to do for memory cooking is to press
the NUMBER buttons. Then the selected memory program automatically starts
cooking.
CAUTION
CM1929B_XEU_DE68-04030D-02_EN.indd 17 2017-07-03 8:13:41
To Next Page
Loading...
