English - 19
HOW TO OPERATE MEMORY COOKING
After having finished memory programming, just press the NUMBER buttons of the
memory number you want to select. The oven will automatically start heating according
to the pre-programmed cooking time and power level.
1. Put the food into a suitable container, place it in the centre
of the oven and then close the door securely.
Result : The oven lamp will go o.
2. Press NUMBER button and press the START button.
HOW TO OPERATE DOUBLE QUANTITY BUTTON
1. Press the desired memory NUMBER buttons.
Result : Cooking time which was multiplied by the preset
factor appears in the display and cooking starts
with time digits counting down.
2. Press the DOUBLE QUANTITY button.
And Press the START Button.
DOUBLE QUANTITY BUTTON PROGRAMMING
1. Press the OK (Program 2sec) button.
2. Select desired program code by using NUMBER buttons.
3. Press the DOUBLE QUANTITY button.
4. Press NUMBER buttons to set the magnification factor
within the range from 1.00 to 9.99.
5. Press the START button
Default factor is 1.65 preset from the manufacturer for increasing the cooking time.
Make sure that you set a correct factor between 1.00 and 9.99 for each memory
code number.
Press button to exit the programming mode.
Though you can successfully set a double quantity factor whose setting might result
in excess of the maximum time allowed for each power level, the oven does not
operate exceeding the maximum time.
CM1929B_XEU_DE68-04030D-02_EN.indd 19 2017-07-03 8:13:41
To Next Page
Loading...
