14
4. Disassembly and Reassembly
4-10 Replacement of Air Filter
1. Remove the bolt at both ends of the Air Filter. Then
the locking clamps inside are released.
2. Lift the Air Filter off the post carefully.
NOTE : Spacer pins are not detachable from the
Air Filter
4-11 Replacement of High Voltage Capacitor
NOTE: It is not necessary to remove Magnetron in
order to remove HVC.
1. Remove the outer panel and back cover.
2. Discharge the high voltage capacitor.
3. Remove HVT wire and H.V.Fuse.
4. Remove screws securing HVC bracket.
To Next Page
Loading...
