Samsung DC32E-M

111
O
O
O
O
O
O
O
General
Game Mode
Auto Power On
Safety Lock
Button Lock
Standby Control
HDBT Standby
Network Standby
Max. Power Saving On
-
The displayed image may differ depending on the model.
Button Lock
This menu can be used to lock the buttons on the product.
Only the remote control can control the product if Button Lock is set to On.
•
Off / On
Standby Control
You can set the screen standby mode to be applied when an input signal is received.
•
Auto
Power-saving mode will activate if no input signals are detected even though a source device is connected to the display.
The message No Signal will appear if no source device is connected.
•
On
Power-saving mode will activate if no input signals are detected.
•
Off
The message No Signal will appear if no input signals are detected.
―
The Standby Control option is only enabled when Source List is set to PC, DVI, HDMI.
―
If No Signal is displayed although a source device is connected, check the cable connection.
HDBT Standby
Keep the HDBT module active when the device is turned off. (This uses more power.)
•
Off / On
―
EME models are only supported.
Network Standby
This feature keeps the network power on when the product turns off.
•
Off / On
―
This function is only available for models that can connect to a network.