68
Broadcasting
Configure the Broadcasting settings for the product.
Broadcasting is only available on the DCE, DCE-M models.
Chapter 07
Auto Program
MENU m → Broadcasting → Auto Program → ENTER E
Broadcasting
Auto Program
Antenna
Channel List
Guide
Schedule Manager
Edit Channel
Edit Favorites
Air
-
The displayed image may differ depending on the model.
-
Available in TV mode only.
The Auto Program function memorizes all channels that are available over the air or through your cable system and adds
them to the Channel List.
―
Channel memorization can take up to 45 minutes, depending on your cable system.
―
Memorized channels are added to the Added Ch. list. These are the channels you will see when you use the channel
buttons on your remote.
Cancelling Auto Program
1
Press the Stop button.
2
A Stop Auto Program? message appears.
3
Press the Yes button.
To Next Page
Loading...
