Samsung DC32E-M

95
System
Chapter 10
Setup
MENU m → System → Setup → ENTER E
English
O
System
Menu Language
Multi Control
Time
Eco Solution
Auto Protection Time
Screen Burn Protection
Setup
-
The displayed image may differ depending on the model.
Go through the initial setup steps like you did the first time you used this product.
―
Enter your 4 digit PIN number. The default PIN number is “0-0-0-0".
If you want to change the PIN number, use the Change PIN function.
Set the HDBaseT standby mode.
―
EME models are only supported.
•
Off: The device cannot be turned on via HDBT once it is turned off.
•
On: Keep the HDBT module active when the device is turned off. (This uses more power.)