Samsung DCS-816 - Specifications

SAMSUNG General Description
DCS-816 March 1999
2 - 3
2.4 SPECIFICATIONS
The following tables provide technical data for the DCS-816 hybrid/key telephone system.
ELECTRICAL SPECIFICATIONS
AC INPUT
220 VAC ± 20%, 48-63 Hz
POWER CONSUMPTION (MAX) 60 WATTS MAX
DC OUTPUT FUSE RATING 2.0 AMP
+5 VOLTS 1.5 AMPS MAX
-5 VOLTS 0.5 AMPS MAX (on the base board)
-55 VOLTS 0.7 AMPS MAX
-54 VOLTS 0.4 AMPS MAX
DIMENSIONS AND WEIGHTS
HEIGHT WIDTH DEPTH WEIGHT
(mm) (mm) (mm) (kg)
BASIC KSU 465 315 120
DIGITAL KEYSET (12/24B MODELS) 108 216 229 1.2
DIGITAL KEYSET (DS-2100B) 88 155 215 0.6
DOOR PHONE 127 99 32 0.2
DOOR PHONE INTERFACE MODULE (DPIM) 29 90 120 0.2
CTI INTERFACE MODULE 29 90 120 0.2
ENVIRONMENTAL LIMITS
OPERATING TEMPERATURE
0 - 40 °C
STORAGE TEMPERATURE
-10.5 - 70 °C
CABLE REQUIREMENTS
EQUIPMENT CABLE AWG MAX FEET MAX METRES
DIGITAL KEYSETS 1 PR. TWISTED 24 1300 400
SINGLE-LINE STATION 1 PR. TWISTED 24 3000 1 KM
DOOR PHONE 2 PR. TWISTED 24 330* 100
CTI INTERFACE MODULE 1 PR. TWISTED 24 1300 400
*This is the maximum length of the cable between the door phone and the DPIM. The DPIM can
be installed up to 250 cable metres from the KSU.
Details of system tones may differ as specified by local regulations
SYSTEM TONES
TONE FREQUENCIES CADENCE
DIAL TONE 350 + 440 Hz CONTINUOUS
RING BACK TONE 440 + 480 Hz 1 sec on + 3 sec off
BUSY TONE 480 + 620 Hz 0.5 sec on + 0.5 sec off
DND/NO MORE CALLS 480 + 620 Hz 0.25 sec on + 0.25 sec off
ERROR TONE 480 + 620 Hz 0.25 sec of each tone
CONFIRMATION TONE 350 + 440 Hz Three bursts of tone: 0.1 sec on + 0.1 sec off
TRANSFER/CONF 350 + 440 Hz 0.1 sec on + 0.1 sec off