Samsung DCS-816 - Station Features; Station Feature Descriptions

SAMSUNG General Description
DCS-816 March 1999
4 - 17
tables to identify and route calls within the closed numbering group and normal
external calls. Local site calls are identified based on a programmable 2- digit
self-identification code.
The system, when the feature is set to ON in MMC 210, automatically enters
LCR mode and analyses the digits dialled. If the first two digits are the same as
the system Self ID code programmed in MMC 724 the system will activate the
feature based on the following digits dialled, e.g. internal call. All other outgoing
calls are routed in accordance with LCR related tables MMC 710, MMC 712 and
MMC 713.
Walking Class of Service (WCOS)
This feature allows users to make calls or use features from a station that is
restricted. The users may either use the WCOS feature code or the
authorisation code feature. Both methods change the class of service
corresponding to the station passcode or authorisation code that is dialled. After
the call is completed, this station returns to its programmed class of service.
4.3 STATION FEATURES
Appointment Reminder Off–Hook Ringing
Automatic Hold Off–Hook Voice Announce (OHVA)
Automatic Privacy One Time Do Not Disturb
Background Music One–Touch Dialling Keys
Busy Station Callback On–Hook Dialling
Busy Station Indications (BLF) Programmable Keys
Call Forwarding Programmed Station Messages
Call Pickup Protection From Barge–In
Dial By Name Pullout Directory Tray
Direct Station Selection (DSS) Pulse To Tone Switch Over
DND Override
Do Not Disturb (Programmable)
Door Lock Release
Exclusive Hold
Redial
Auto Retry
Last Number
Save Number
Group Listening Ring Modes
Headset Operation Ringing Preference
Hearing Aid Compatible Speakerphone
Line Queuing With Callback Station Lock
Line Skipping Tri–Coloured Lights
Loud Ringing Interface Volume Settings
Message Waiting Light/Indication Wall–Mountable Keysets
Mute Microphone/ Handset
B
4.4 STATION FEATURE DESCRIPTIONS
Appointment Reminder
Keysets with an alarm key can be used like an alarm clock. When programmed
for a specific time, the keyset will sound a distinctive ring to remind you of
meetings or appointments. Alarms can be set for "today only" or for every day at
the same time. Up to two alarms may be set at each keyset. Display keysets can
also show a programmed message when the alarm rings.
Automatic Hold
Station users can enable or disable automatic hold at their keysets. While a user
is engaged on an outside (C.O.) call, pressing another trunk key, route key or