Samsung DCS Part 7
Installation March 2001
49
7.10 Voice Mail/Auto Attendant
System operation provides special programming and hardware for use with a customer-
provided voice mail/auto attendant system.
All single line telephones on the SLI card provide a disconnect signal required for VM/AA
operation.
Use one pair twisted 0.5mm or 0.8mm jumper wire to cross-connect SLI circuits to the
VM/AA system (Figure 7–11).
Program these ports for VM/AA use in MMC 207 and set VM/AA options in MMC 726. If re-
quired, use MMC 601 to put VM/AA ports in a VM/AA station group.
To Next Page
Loading...
