13Samsung Electronics
2. Disassembly and Reassembly
2-1 Indoor Unit
Stop operation of the air conditioner and remove the power cord before repairing the unit.
No Parts Procedure Remark
1
2
Filter-Pre
Blower & Duct
1) Disassemble 2 screws of indication part
and then assemble the direction of
2 Plate-Handle places by use of screw
as shown in 2).
2) Turn the Plate Handle by hand when
removing the Filter-Pre.
3) When pulling the Filter-Pre handle,
the Filter-Pre can be assembled.
✳ Be sure to remove the cushion on the
marked part after initial installation.
(It cause the damage of noise).
1) After disassembling 9 places indicating
screws, detach Ass'y Cover Bottom.
■ DH052EZM1 / DH070EZM
22143A(4)_1 2/13/06 3:03 PM Page 13
To Next Page
Loading...
