Disassembly and Reassembly
15Samsung Electronics
No Parts Procedure Remark
3 Control In
1) After disassembling 1 indicating screw,
detach the Cover-Control.
2) Detach the Motor-Fan in and Sensor
Connector connected to PCB.
3) Disassemble 2 indicating screws.
(arrow mark)
4) Hold the Ass'y Control In by hand to lift up
a little and then release the status of
hanging on the hanging slot.
22143A(4)_1 2/13/06 3:03 PM Page 15
To Next Page
Loading...
