Samsung DH32ZA1 - Option Switch Setup

SAMSUNG | 45
INSTALLATION
3
Installation the Front Panel
3-9. Installation the Front Panel (Cassette Type)
ΠOpen the electrical component box cover removing the screws.
´ Connect the cables of the front panel to the PCB as shown in figure.
ˇ Close the electrical component box cover and secure the screws.
¨ Install the front panel using two hooks on the both sides of the indoor unit.
ˆ Secure the front panel to the indoor unit using the bolts(4EA).
HEX ; M6 x L30
´
ˇ
¨
ˆ
Front Panel
;;;
;;;
yyy
yyy
Hook and Eye
Eye
Front panel fixing holes
Air blocking
kit
- When user’s optional accessory is a wireless remote controller,
you have to install the receiver & display unit.
- There are four kinds of air blocking kits. Fill up the air outlet(s)
with one or more kits depending on the situation, then install the
insulation to block air completely.
- After removing the cushion Blocking that is installed in the air
outlet of ACH3600G/4400G and CH36ZA/44ZA to install the air
blocking.
Note