26
c. After finishing a setup, run a adjustment program for Bad pixel.
(Running program is in SUNAP0916 folder and if you dobule-click SunplusCam_AP.exe, adjustment
program will run.)
d. After running an adjustment progrm, set a camera to Light source like below picture.
When setting, Turn the power on, at the same time pressing LCD button of camera, MENU button
and OK button.
e. After connecting a camera, if you click
a Product button, Product information
window will appear like side.
If it doesn't appear, after
disassembling a camera, connect it
from first step and run it.
ⅣⅣ.. AADDJJUUSSTT MMEENNTT
Double click
To Next Page
Loading...
