27
f. If a Product information will display,
control a camera through MASS in
upper menu.
g. After checking Snap Rawdata by VC,
press a Find Bad Pixel button and
test a Bad pixel.
h. When finishing a Bad pixel test, the
message window about "put a camera
to Black image" will appear.
i. At this time, after covering a camera
with hand or black thing, click
"OK(Confirm)" button.
j. After finishing a Bad pixel test,
"Find 0 Bad pixel!" will appear.
If the numger of Bad pixel is over
256, this camera had bad quality.
(In this kind of case, CMOS exchange
is needed.)
k. When finishing a Bad pixel test,
after displaying "Find 0 Bad pixel!", if
you press Download bad pixel, in low
position of Camera, "Bad Pixel Write
File OK" will
appear. Adjustment and test are
done.
ⅣⅣ.. AADDJJUUSSTT MMEENNTT
To Next Page
Loading...
