28
3) AWB adjustmen.t
a. Turn the power on, at the same time pressing LCD button of camera, MENU button and
OK button. (TEST MODE)
b. Set up a camera like below picture.
c. In TEST mode, change it to Movie mode by pressing Mode button.
d. In Movie mode of TEST mode, if you press Right button, AWB adjustment will progress
automatically.
e. When finishing an adjustment, "OK" will appear on LCD.
4) TRIG adjustment
a. Turn the power on, at the same time pressing LCD button of camera, MENU button and
OK button. (TEST MODE)
b. Put a AE Tester to LV 7.0 and set up a camera like below picture.
c. In TEST mode, change it to Movie mode by pressing Mode button.
d. In Movie mode of TEST mode, if you press Down button, Trig adjustment will progress
automatically.
e. When finishing an adjustment, it will radiate in LV 6.8 and if it doesn't radiate in LV 7.2, the
adjustment is finished.
To Next Page
Loading...
