《110》
■ Windows 98/ 98SE
1. Check whether the camera and PC are transferring a file. If the camera ststus lamp blinks,
you have to wait until the lamp is turned off.
2. Unplug the USB cable.
■ Windows 2000/ ME/ XP
(The illustrations may be different from the real display in accordance with the Windows O/S.)
1. Check whether the camera and PC are transferring a file. If the camera ststus lamp blinks,
you have to wait until the lamp is turned off.
2. Double-click the [Unplug or Eject Hardware]
icon on the task bar.
Removing the removable disk
[Click !]
[Click !]
[Click !]
4. The [Stop a Hardware device] window will
open. Select the [USB Mass Storage
Device] and click the [OK] button.
3. The [Unplug or Eject Hardware] window will
open. Select the [USB Mass Storage
Device] and click the [Stop] button.
5. A [Safe to Remove Hardware] window will
open. Click the [OK] button.
To Next Page
Loading...
