《14》
Battery status
Battery indicator
The battery are fully
charged
Prepare new battery
There is no battery capacity.
Replace with new battery.
■ There are 3 indicators for battery condition that are displayed on the LCD monitor.
● When the battery chamber cover is opened, do not press the battery chamber cover by
force. This may cause the battery chamber cover modification or breakage.
INFORMATION
Connecting to a Power Source
3. To close the battery chamber cover, push it until it clicks.
2. Insert the batteries taking note of the
polarity (+/ -).
1. Open the battery chamber cover by pushing in the direction of the
arrow.
: If the camera does not turn on after you have inserted batteries,
please check whether the batteries are inserted with the correct
polarity (+/ -).
Using the batteries
[
Inserting the AA type battery
]
[
Inserting the CR-V3 type battery
]
To Next Page
Loading...
