《78》
PictBridge : RESET
■Initialises user-changed configurations.
1. Connect the camera to your printer.
The USB menu must be set to [PRINTER] after you
connect the camera to the printer.(See p.74)
2. Use the LEFT and RIGHT buttons to select the [RESET]
menu tab.
3. Use the UP and DOWN buttons to select the desired
submenu value, and then press the OK button.
- If [NO] is selected : Settings will not be reset.
- If [YES] is selected : All print and image settings will be reset.
※ Default print setting varies depending on the printer manufacturer.
For your printer’s default setting, refer to the user’s guide that came with your printer.
NO
YES
RESET
MOVE:
▲▼
To Next Page
Loading...
