116
Digimax Reader
Please check the following if the USB connection malfunctions.
[Case 1] The camera power is off.
Turn the camera power on. We recommend using an AC power adapter in PC
mode.
[Case 2] USB Driver is not installed correctly.
Install the USB Driver correctly. Refer to page 97.
[Case 3] The USB cable is not connected or you are using a cable with an incorrect
specification.
Use a USB cable with the correct specification.
FAQ
To get an image that can be recognized as a text :
- Keep a distance of 20cm between the subject and the camera.
- The subject need to be centered.
- Avoid the camera shake to get a good image.
Refer to the [Help] menu in Digimax Reader for further information.
INFORMATION
8. To save the section as a text, click the Save( )
icon. A window as shown alongside will be
displayed.
9. Select a file type that you want to. Selectable file type : *.TXT, *.HWP, *.DOC, *.RTF
To Next Page
Loading...
