《58》
PictBridge : DPOF Printing Setup menu
PictBridge : Reset
1. Use the LEFT and RIGHT buttons to select the
[RESET] menu tab.
2. Use the UP and DOWN buttons to select the
desired sub menu value, and then press the OK
button.
If [Yes] is selected : All print and image settings
will be reset.
If [No] is selected : Settings will not be reset.
※ Default print setting varies depending on the printer manufacturer.
For your printer’s default setting, refer to the user’s guide that came with your
printer.
RESET
Yes
No
Move:
■ DPOF Print : This allows you to directly print the files with DPOF information.
■ Initialises user-changed configurations.
1. Use the LEFT and RIGHT buttons to select the
[DPOF PRINT] menu tab.
2. Use the UP and DOWN buttons to select the
desired sub menu value, and then press the
OK button.
[Yes] :
Directly print the file with the DPOF information
[No] : Cancel the printing
※ Depending on the manufacturer and printer model, some menus may not be
available.
When a printer does not support DPOF, the menu is still displayed but not
available.
DPOF PRINT
Yes
No
Move:
Menu tab Main menu Sub menu Secondary menu Page
Series -
Reset -
Power Off Off, 1, 3, 5, 10min - p.60
No -
Yes -
06/03/01 13:00 -
yy/mm/dd -
dd/mm/yy -
mm/dd/yy -
Off -
Cape Verde Tashkent
London Almaty
Rome, Paris, Berlin Bangkok, Jakarta
Athens, Helsinki Beijing, Hong Kong
Moscow Seoul, Tokyo
Abu Dhabi Guam, Sydney
Okhotsk Denver, Phoenix
Wellington, Auckland Chicago, Dallas
ENGLISH FRANÇAIS
DEUTSCH ESPAÑOL ITALIANO
P”CCK»…
PORTUGUÊS
DUTCH DANSK
SVENSKA SUOMI
BAHASA
POLSKI Magyar
File
Language
Format
Date&Time
World Time
p.59
p.60
p.60
p.61
p.61
■In this mode, you can set up basic settings. You can use the setup menu in all
camera modes, except Voice Recording mode.
The items indicated by are default settings.
To Next Page
Loading...
