《82》
Digimax Reader
■ Digimax Reader is a Text recognition program. You can save an image file that
is captured in the Text mode, as a text file with this program. This software is
only compatible with Windows. (Windows 2000/XP recommended)
■ To start the program, click [Start → Programs → Digimax Reader].
The following screen will appear.
■ How to use the Digimax Reader
1. Connect the camera and the PC with a USB cable and download the images
that were stored in the camera to the PC.
* Please see page 75 - 77 for details on Connecting a camera and PC,
Downloading images.
2. Run the Digimax Reader.
3. Click the Open( ) icon as shown
alongside.
4. Select the image you want to save as a text file.
* Only an image that was taken with a
SAMSUNG camera can be opened.
5. Click the Area Analysis ( ) icon to scan the
image.
6. Part of the image you selected will be displayed
as shown.
7. Click the Character Recognition ( ) icon.
The part selected in the previous step will be
recognized as text.
8. To save the section as a text,
click the Save ( ) icon. A window as shown
alongside will be displayed.
To Next Page
Loading...
