Samsung Digimax S500 - Page 47

48
Ⅳ.ADJUSTMENT
3) BATTERY LEVEL ADJUSTMENT
After changing the MAIN PCB, adjust WARNING LEVEL and LOCK LEVEL.
< Codes of program >
< How to adjust the item >
a. Prepare a POWER SUPPLY.
b. Connect the camera to the POWER SUPPLY.
c. Change the voltage to 2.71
d. Insert the codes and save the program in ths SD card.
e. Insert the SD card to the camera and turn on the camera.
f. The adjustment is complete automatically. The LCD will be turned off and the camera is turned off.
BASIC PROGRAM BATTERY LEVEL ADJUSTMENT
<1> PROCESS CODE ; <1>17;
<2> 65535 ; <2>65535;
<3> PROCESS CODE ; <3>17,3;
<4> 0 OR 1 ; <4>0;
<5> 0 OR 1 ; <5>0;
<6> CONDITION ; <6>10,37,87,38,90,39,82,40,85,48,84,70,83,71,86,72,89,73,81,74,89;
<7> SPEC ; <7>;
<8> NOT <8>;
<9> NOT <9>;
<10> NOT <10>;
<11> NOT <11>;
<12> NOT <12>;
<13> NOT <13>;
<14> 0 <14>65535;
<15> 0 <15>0;close lens