Samsung Digimax S500 - Page 48

49
Ⅳ.ADJUSTMENT
BACKLASH TEST
D1:-27
BACKLASH : -27
< Figure 4-2 >
< Figure 4-1 >
4) BACK LASH ADJUSTMENT
After changing the MAIN PCB, BARREL and CCD, adjust the BACK LASH.
< Codes of program >
<How to adjust the item>
a. Insert the codes and save the program in the SD card.
b. Insert the SD card to the camera and turn on the camera.
c. After completing the adjustment, the camera will be turned off.
BASIC PROGRAM BACK LASH
<1> PROCESS CODE ; <1>9;
<2> 65535 ; <2>65535;
<3> PROCESS CODE ; <3>9,0;
<4> 0 OR 1 ; <4>1;
<5> 0 OR 1 ; <5>1;
<6> CONDITION ; <6>2;
<7> SPEC ; <7>50;
<8> NOT <8>;
<9> NOT <9>;
<10> NOT <10>;
<11> NOT <11>;
<12> NOT <12>;
<13> NOT <13>;
<14> 0 <14>65535;
<15> 0 <15>0;