Samsung Digimax S500 - Page 49

50
Ⅳ.ADJUSTMENT
TEST COUNT : 5
LUMINANCE : 510
LINE DELAY : 249
SHUTTER ADJ SUCCESS!
PROCESS FAIL
TEST COUNT : 15
LUMINANCE : 3048
LINE DELAY : 109
< Figure 5-2 >
< Figure 5-1 >
5) SHUTTER CLOSE TIME ADJUSTMENT
After changing the MAIN PCB, BARREL and CCD, adjust the SHUTTER CLOSE TIME.
< Codes of program >
< How to adjust the item >
a. Prepare a AE TESTER that can test upto LV 16.1°æ0.2
b. Attach the camera to the AE TESTER.
c. Change the LV to 15.8°æ0.1
d. Insert the codes and save the program in ths SD card.
e. Insert the SD card to the camera and turn on the camera.
f. After completing the adjustment, the camera will be turned off.
※ If the adjustment is incomplete, <Figure 5-2> will display with beep sound. In this case, re-try the adjustment
process.
BASICPROGRAM SHUTTERCLOSETIME
<1>PROCESSCODE; <1>7;
<2>65535; <2>65535;
<3>PROCESSCODE; <3>7,1;
<4>0OR1; <4>1;
<5>0OR1; <5>1;
<6>CONDITION; <6>2,507,477,250,2,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,15;
<7>SPEC; <7>;
<8>NOT <8>;
<9>NOT <9>;
<10>NOT <10>;
<11>NOT <11>;
<12>NOT <12>;
<13>NOT <13>;
<14>0 <14>65535;
<15>0 <15>0;