What does bE2 error mean on Samsung DV42H5200EF/A3-03 Dryer?
The error code bE2 on your Samsung Dryer indicates an invalid state of key. Make sure a button is NOT being pressed continuously. Try restarting the cycle. If the problem continues, you should call for service.
What to do if Samsung DV42H5200EF/A3-03 doesn’t dry clothes?
If your Samsung Dryer isn't drying clothes properly, start by checking the door latch, power cord, circuit breaker, and lint filter. Also, ensure the exhaust hood outside your home opens and closes freely and that the exhaust system isn't blocked by lint. Use a 4” rigid metal exhaust duct for proper ventilation. Avoid overloading the dryer; one wash load should equal one dryer load. Separate heavy and lightweight items for more even drying. Large items may need repositioning. Make sure the dryer is draining correctly, and if the load is too small, add a few towels.
Why Samsung DV42H5200EF/A3-03 Dryer is not heating?
If your Samsung Dryer isn’t heating, first check the circuit breaker and fuses in your home. Make sure you've selected a heat setting other than Air Fluff. If you have a gas dryer, verify that the gas supply is turned on. Also, clean the lint filter and exhaust duct. Keep in mind that the dryer might have entered the cool-down phase of its cycle.
Why is my Samsung DV42H5200EF/A3-03 Dryer so noisy?
If your Samsung Dryer is making unusual noises, check the drum for any objects like coins, loose buttons, or nails and remove them. The dryer gas valve or heating element cycling on and off is normal. Ensure the dryer is properly leveled according to the installation instructions. A humming sound can occur due to air moving through the drum and exhaust system.
How to prevent lint on clothes in Samsung Dryer?
To prevent lint on clothes when using your Samsung Dryer, clean the lint filter before every load, and sometimes during the cycle if needed. Separate lint-producing fabrics from lint-trapping fabrics. Divide larger loads into smaller ones. Always check pockets before washing and drying.
What does dF error mean on Samsung DV42H5200EF/A3-03?
The error code dF on your Samsung Dryer indicates an invalid door, you should call for service.
What does AE error mean on Samsung Dryer?
The error code AE on your Samsung Dryer indicates an electronic control problem (communication error), you should call for service.
What does EEE error mean on Samsung DV42H5200EF/A3-03 Dryer?
The error code EEE on your Samsung Dryer indicates an invalid state of Eeprom communication, you should call for service.
What does tE error mean on Samsung DV42H5200EF/A3-03?
The error code tE on your Samsung Dryer indicates that the thermistor resistance is very low or high. Clean the screen or vent. If the problem continues, you should call for service.
Why does water drip from nozzle when Steam-Care starts in Samsung DV42H5200EF/A3-03 Dryer?
If water drips from the nozzle when the Steam-Care cycle starts on your Samsung Dryer, this is just steam condensation and will stop shortly.
Read this manual thoroughly to ensure safe and efficient operation. Retain manual for future reference.
Explains warning symbols like WARNING and CAUTION to prevent injury and property damage.
Provides a warning regarding cancer and reproductive harm as required by California law.
Lists crucial precautions for operating the dryer, including fire, shock, and injury prevention.
Guide to unpacking the dryer, inspecting for damage, and identifying included accessories.
Details basic requirements, grounding, gas/electric setup, location, and clearances.
Provides requirements for dryer exhaust ducting, including materials, length, and routing.
Explains electrical service requirements and connection procedures for U.S. and Canada.
Details gas supply requirements, conversion, and connection procedures for gas models.
Instructions for reversing the dryer door and a checklist for final installation steps.
Details the functions and layout of the dryer's control panel for different models.
Explains how to select cycles, available options, dry levels, temperatures, and indicators.
Guidance on loading, starting, and using features like Rack Dry, Child Lock, Smart Care.
How to save custom cycles and use the Smart Care app for diagnostics.
Instructions for cleaning the control panel, tumbler, exterior, exhaust system, and lint filter.
Advice for drying specific types of garments and items to avoid.
Lists common dryer problems and their solutions, including information codes.
Includes a fabric care chart, environmental protection, and product specifications.
Details the limited warranty terms, coverage, and exclusions for products purchased in the USA.
Details the limited warranty terms, coverage, and exclusions for products purchased in Canada.
To Next Page
General