English
Installation
English38
5. Remove the two screws that are above and below the
cut-out in the front frame.
6. Remove the two screws above and below the lever
holder on the opposite side of the door opening.
7. Remove the two screws that hold the lever holder in
place, and then remove the lever holder.
8. Re-insert the two screws that held the lever holder
into the same screw holes, and then tighten.
DV8900HB_SimpleUX_WEB_OID57652_English.indd 38 2022-09-07 11:27:19
To Next Page
Loading...
