English 35
Before you start
Here are a few things you should know before starting your dryer.
Sort and load
• Put one wash load in the dryer at a time.
• Do not mix heavy and lightweight items together.
• To improve drying efciency for one or two items, add a dry towel to the load.
• For best results, untangle items before inserting them into the dryer. Tangled items
may degrade the drying efciency or cause the door to open.
• Overloading reduces the tumbling action, resulting in uneven drying and wrinkling.
• Unless recommended on the care label, do not dry woolens or berglass items.
• Avoid drying unwashed items.
• Do not dry items soiled with oil, alcohol, gasoline, etc.
Functional prerequisite
Lint lter
To prevent a risk of re, make sure to
clean the lint lter before or after every
load.
1. Turn off the dryer.
2. Open the door and pull out the lint lter
(A) from inside the drum.
3. Open the lint lter by separating it at
the top. Remove the lint, and then clean
the lint lter.
4. Close the lint lter, reinsert the lint
lter into the dryer, and then close the
dryer door.
CAUTION
• Do not operate the dryer without the
lint lter in place.
• Do not use a damaged or broken lint
lter. This may reduce performance
and/or cause re.
Before you start
Untitled-10 35 2020-07-14 3:22:17
To Next Page
Loading...
