Samsung DW80H9950US User Manual (English)

Other manuals for Samsung DW80H9950US

Questions and Answers:

A
Angel ClarkAug 17, 2025
Why won't my Samsung Dishwasher start?
- J
  Jeremy Johnson DDSAug 17, 2025
  Your Samsung Dishwasher might not start due to several reasons: * The door may not be completely closed. Ensure it is properly latched. * A cycle might not be selected. Choose an appropriate cycle. * The power cable could be disconnected. Make sure it's properly connected. * The water supply might be off. Check if the water supply valve is open. * The control panel could be locked. Unlock the child lock. * A circuit breaker might be open. Try resetting the circuit breaker.
J
Jared BrownAug 20, 2025
Why does my Samsung DW80H9950US Dishwasher not dry dishes well?
- J
  Jon EverettAug 20, 2025
  If your Samsung Dishwasher isn't drying dishes effectively: * Ensure there is rinse aid in the dispenser; use a liquid type rinse aid. * The water temperature might be low. Connect the water supply line to a hot water supply and use rinse aid with the Sanitize option. * Too many dishes may have been loaded. Ensure proper loading of items. * Glasses and cups with concave bottoms may be holding water. After the cycle, empty the lower rack first to prevent water from dripping onto the dishes in the lower rack.
K
Kristin MayAug 23, 2025
Why is my Samsung DW80H9950US too noisy?
- D
  daniel46Aug 23, 2025
  Your Samsung Dishwasher might be noisy for several reasons: * Sound is normally generated when the dispenser cover is open and the drain pump is operating in an early stage. * The dishwasher may not be level. Ensure the dishwasher is level. * There might be a ‘chopping’ sound because a nozzle is bumping against the dishes. Rearrange the dishes.
E
ebrownAug 28, 2025
Why Samsung DW80H9950US leaves glasses with a light film?
- A
  athomasAug 28, 2025
  If your Samsung Dishwasher leaves a light film on glasses: * The water supplied may be soft, and too much detergent was used. Try underloading the dishwasher and using a rinse aid to minimize this. * Aluminum dishes may have been included in the wash load. Remove the marks on the dishes using a low sensitivity cleaner.
D
Doris MorrisAug 31, 2025
Why does my Samsung DW80H9950US leave a yellow or brown film inside?
- C
  Carrie SanfordAug 31, 2025
  A yellow or brown film inside your Samsung Dishwasher is likely caused by coffee and tea soils. Remove the soils using a spot cleaner.
K
Katie MccannSep 2, 2025
How to get rid of bad odor in Samsung DW80H9950US?
- W
  walter82Sep 2, 2025
  To eliminate bad odors from your Samsung Dishwasher: * If water was left over from an incomplete cycle, insert detergent without loading dishes, and run the Normal cycle to clean the dishwasher. * If the dishwasher is not used daily, or soiled dishes are left in the unit too long, place a glass with 8 ounces of vinegar upright into the lower rack with the dishwasher empty and no detergent, and then run a Normal cycle.
E
emilymartinezSep 5, 2025
Why is my Samsung DW80H9950US Dishwasher taking too long?
- R
  Robert RosalesSep 5, 2025
  If your Samsung Dishwasher is taking too long, it might be due to cold water being supplied. Check if the water supply line is connected to a hot water supply, as additional time is required to heat cold water.
Y
Yvonne TurnerSep 8, 2025
Why Samsung Dishwasher does not have a smoothly rotating nozzle?
- L
  Lance EsparzaSep 8, 2025
  If the nozzle in your Samsung Dishwasher isn't rotating smoothly: * The nozzle hole may be clogged with food particles. Clean the nozzle hole. * The nozzle might be blocked by a dish or pot. After placing the dishes into the racks, rotate the nozzles by hand to check whether any of the dishes interfere with them.
D
Destiny OneillSep 12, 2025
What to do if Samsung Dishwasher has a bent upper rack after loading dishes?
- D
  Danielle WilsonSep 12, 2025
  If the upper rack of your Samsung Dishwasher bends after loading dishes, it indicates that the dishes are not loaded properly. Load your dishes as recommended.
J
Jasmin MunozSep 13, 2025
What does Temperature Sensor error mean on Samsung DW80H9950US Dishwasher?
- C
  cvillarrealSep 13, 2025
  If your Samsung Dishwasher displays a Temperature Sensor error, it indicates a functional error. With the dishwasher empty, add detergent, and then run a cycle.

Samsung DW80H9950US Specifications

General

Type	Built-In
Capacity	15 Place Settings
Number of Wash Cycles	6
Number of Racks	3
Upper Rack Features	Adjustable
Cutlery Basket/Rack	Yes
Water Filtration System	Yes
Water Consumption per Cycle	3.5 gallons
Color	Stainless Steel
Energy Star Certified	Yes
Third Rack	Yes
Stainless Steel Interior	Yes
Wi-Fi Enabled	Yes
Noise Level	39 dB
Control Type	Touch
Dimensions (H x W x D)	33.9 x 23.8 x 24.8 inches
Lower Rack Features	Fold Down Tines
Water Consumption	3.5 gallons
Sound Level	39 dBA