To Next PageTo Next PageWhy does my Samsung DW80M2020US have a bent upper rack?
If the upper rack of your Samsung Dishwasher is bent after loading dishes, it's likely because the dishes are not loaded properly. Load your dishes as recommended.
Why Samsung DW80M2020US Dishwasher not heating up?
If your Samsung Dishwasher isn't reaching the expected temperature after 60 minutes of heating, several factors could be responsible. The heater itself might be faulty and need replacement. The thermistor could be malfunctioning, requiring inspection or replacement. Other potential causes include problems with the Main PBA, a failure in the case brake to detect the pulse, a malfunctioning water valve, a broken overflow sensor, or a water leakage. Check for and resolve any water leakage.
What to do if the non-water switch doesn't work on my Samsung DW80M2020US?
If the non-water switch isn't working during the pre-wash phase of your Samsung Dishwasher, it could be due to several reasons. First, check if the water supply pressure is low and ensure the water supply valve is open. If these are fine, the non-water switch itself might be broken and need replacing. Also, the wash pump might not be working, or there could be issues with the Main PBA. Inspect or replace the Main PBA.
General| Type | Built-In |
|---|---|
| Color | Stainless Steel |
| Number of Wash Cycles | 4 |
| Noise Level | 55 dBA |
| Capacity | 14 Place Settings |
| Energy Star Certified | Yes |
| Drying System | Heated Dry |
| Water Consumption | 3.5 gallons per cycle |
