Samsung Electronics 3-3
3-2-1 Operation KEY and Display
1. KEY Function
Ɣ
Trial Operation of Heat Exchange(KEY1) : The operation is to check whether the product operates properly after
the installation.
1) KEY 1 : Trial operation
Ɣ
Operation condition : Heat exchange/Turbo wind
Ɣ
Repeat on/off of trial operation whenever a key enters.
Ɣ
Trial operation is stopped 30 minutes later, it returns to DISPLAY Default state 30 minutes later.
2) KEY 2 : Data display
Ɣ
The marked contents is changed whenever you press KEY2 once.
Ɣ
Press the KEY2 switch for more than 3 seconds to reset.
Function
Input Time
KEY1 KEY2
1 time Trial Operation of Heat Exchange Data Display
KEY 1 KEY 2
To Next Page
Loading...
